Support1000

Sometimes, after you install a software or hardware you might have problem in booting the computer in to the desktop.

One solid message we used to get is “We apologize for the inconvenience, but Windows did not start successfully. A recent hardware or software change might have caused this.”

If your computer stopped responding, restarted unexpectedly, or was automatically shut down to protect your files and folders, choose Last Known Good Configuration to revert to the most recent settings that worked.”

If your computer doesn’t boot or if it got stuck with reboot loop or if it gives blue screen then you can follow the basic steps given below:

1. Reboot after disconnecting all the external devices. For eg. printer, scanner, Xbox, etc.
2. Read the error message properly if you get the blue screen. It may tell you the hardware or software that causing the problem.
3. Check whether you can boot it in the safemode
4. If it got stuck in the reboot loop and if you are able to boot in the safemode then go to System properties -> Advance -> Startup and Recovery -> disable Automatic Restarts. If you reboot the computer now you will be able to read the error message on the blue screen.
5. If you could boot the computer in the safemode then try disabling Startup items and non microsoft services from the System configuration utility (Msconfig).
Bala
Support1000.Com